Clarke® Focus® II L20 Autoscrubber w/Boost®-20",140AH

Clarke® Focus® II L20 Autoscrubber w/Boost®-20",140AH

Item # 3001006-EA

  • Superior solution pick-up. Quiet at 65 dB(A). Easy operation. Environmentally friendly with efficient solution usage.
  • Working voltage: 24 volt DC
  • 12 volt 140AH (AGM)
  • .5 hp, 2 stage tangential discharge vacuum motor
20", Power Traverse, 140AH, w/Boost, ea
Alternate #05362A
$9,900.00/EA

Conventional disc models of the Focus[R] II are available with either 17" or 20" disc scrub decks. The 20" models may be selected with either power traction or brush assist drive. The 17" model is available with traction drive. The brush/pad driver installation and removal is made simple with an easy on/off push button control.

Superior solution pick-up. Quiet at 65 dB(A). Easy operation. Environmentally friendly with efficient solution usage. Working voltage: 24 volt DC. 12 volt 140AH (AGM).

Features

  • Rugged Polydur[R] tanks withstand impact and resists chemical damage.
  • Orbital scrubbing action produces high speed agitation with small 1/4" orbits.
  • Orbital scrubbing action does not sling cleaning solution out of the scrub path like traditional disc scrubbing motion, therefore conserving and reducing up to 70% of water and chemicals. This conservation allows for longer run times and less labor neede
  • Large opening aids in clean out of recovery tank.
  • Convenient front and rear fill.
  • Large diameter, non-marking wheels provide high traction.
  • Clarke's patented pulse solution control applies an accurate and conservative amount of solution.
  • Easy access to battery compartment is great for maintenance and installation.
  • One touch control panel is simple and effortless to operate. Ergonomically placed controls for all functions.
  • On-board battery charger allows charging at any convenient electrical outlet.
  • The solution tank is conveniently located on the rear of the machine for ease of filling while draining the recovery tank.
  • Squeegee is easy to remove without tools, and breaks away upon impact to prevent damage. Polyurethane front and rear blades wear longer and resist chemicals. Blades easily index without the use of tools.
  • Emergency power disconnect.
  • Solution level indicator is conveniently located for the operator.
  • Recovery drain is located high on the machine to allow draining into a high deep sink or toilet.
  • Security key switch.
  • Safety yellow palm switches.
  • Circuit breaker protection.
  • Excellent line of sight.

Specifications

  • Cleaning Width: 20"
  • Battery Protection System: Low voltage cut-off of brush and solution.
  • Solution & Recovery Tank: 14.5 gallons
  • Solution Flow: 0 - .3 gallons/min
  • Brush Motor Power: .75 hp
  • Brush Pressure: 40 & 75 lbs.
  • Disc, Pad & Brush Sizes: 14" x 20"
  • Brush Speed: 2250 rpm
  • Sound Level: 65.8 db(A)
  • On-Board Charger: Standard
  • Dimensions: 51" L x 29" W x 42" H
  • Width: 22" without squeegee
  • Squeegee Width: 29.9"
  • Agency Approval: cETLus
  • Warranty: Polydur[R] body - 8 years, parts - 3 years, labor - 1 year, battery 18 months pro-rated (1st 90 days unconditional)